About The Wind Power Mounting Kits

£22.96£779.95

Part No: WIND-MKITS
Clear
Rutland Windcharger Logo

On-Board Wind Generator Mounting Kits

504 Mounting Kit

  • Polished Marine Grade Stainless Steel Tube
  • 2 x 1m Pole Sections
  • Joiner
  • Deck Fixing Bracket
  • Stainless Steel Fasters

914 Mounting Kit

  • Polished Marine Grade Stainless Steel Tube
  • 2 x 1.2m Pole Sections
  • Joiner
  • Deck Fixing Bracket
  • Stainless Steel Fasters

Marine Stays Kit (Standard)

  • 2 x 1.2m Polished Stainless Steel Pole Sections/ Cut to Required Length
  • 2 Hinged Pushpit Clamps to fit 25-32mm Rail
  • Suitable for all mounting kits usually recommended for 504/914

1200 Mounting Kit

  • Polished Marine Grade Stainless Steel Tube
  • 2 x 1.35m Pole Sections
  • Joiner
  • Deck Fixing Bracket
  • Stainless Steel Fasters

1200 Stays Kit

  • 2 x 1.35m Polished Stainless Steel Pole Sections/ Cut to Required Length
  • 2 Hinged Pushpit Clamps to fit 25-32mm Rail
  • Suitable for all mounting Kits usually recommended for 1200

 Stay Accessory Kit 914/504/1200

Hardware for a single solid stay

  • 1 Hinged Pushpit Clamps to fit 25-32mm Rail incl. rubber insert
  • 2 End caps for 1 stay and fixings
  • Choose 2 of these to custom make your stays kit with your own lengths of 22mm dia. tube

Deck Mounting Brackets

Purpose designed stainless steel brackets for mounting your own single length pole to a flat surface.

  • Brackets for 914/1200 – CA-12/09
  • Brackets for 504 – CA-12/23

Stainless Steel Tube

Stainless steel tube pre-drilled  at one end to suit the windcharger for customers to adapt to own tower design.

  • Rutland 914 -600mm Tube
  • Rutland 914/1200 – 1200mm Tube
  • Rutland 504 – 500mm Tube
  • Rutland 504 – 1000mm Tube

Land Based Wind Generator Mounting Kits

Tower Kit for 503/504

For temporary Installation

  • 4.0m Polished Stainless Steel Tube (2 x 2m Sections)
  • Joiner and Ground spike

Tower Rigging Kit 503/504

  • guys ready fitted to tower attachments
  • Shackles and Ground Anchors(Anchors suitable for temporary Installation)

Tower Kit 910 Series

Suitable for temporary and Permanent Installation of 913, FM910-3, 914i and FM910-4

  • 6.4mm(3 x 2.13m Sections) of 48mm Diameter Galvanised Steel Tube.
  • Joiners Included

Tower Rigging Kit 910 Series

Complete rigging Kit to support the land tower kit designed for permanent installation.