|
A charge controller fitted to your system will ensure:
·
The system operates automatically
·
Prevents damage to your batteries through over voltage
… so if the batteries become fully charged in your absence from the site the batteries will not be overcharged.
We recommend deep cycle lead acid batteries, sealed or non-sealed.
Cable thickness depends on the overall length used between the windcharger and regulator/battery. For distances up to 20m a cable thickness of 2.5mm is recommended. The regulator should always be positioned within a 1.5m cable run from the battery to minimise voltage losses and ensure accuracy of voltage regulation.
A range of On Board and Land Based Mounting Kits are available for the Rutland 503, 913 and FM910-3 models.
|
